Driveways & Pool Decks
Pressure-washed flatwork built for surfaces that have gone a long stretch without a wash — years of built-up algae and salt film cleared in a single, even pass.
YEARS OF PATINA CAN STILL COME CLEAN
Pressure washing and paver cleaning for Melbourne Beach, on the quiet south end of the island, where a lot of homes have sat through years of salt air undisturbed.
Pressure washing in Melbourne Beach
That's good for the town, but it usually means driveways and pool decks have gone a long stretch without a wash, picking up algae, salt film, and general patina the whole time. The buildup is often deeper than it looks from the street, and on paver surfaces the joint sand has frequently washed low on its own well before we ever show up.
We soft-wash the house — siding, soffits, rooflines — at low pressure so paint and stucco that have held up for years aren't taking a beating they don't need. Driveways and pool decks get pressure-washed to cut through years of built-up algae and salt film. On paver surfaces, that same pressure finishes off joint sand that was likely already thin from age, so we treat re-sanding as part of the job, not an add-on. Sealing after that is what keeps new patina from setting back in as fast.
What that looks like here
Pressure-washed flatwork built for surfaces that have gone a long stretch without a wash — years of built-up algae and salt film cleared in a single, even pass.
Low-pressure cleaning solution on siding, soffits, and rooflines that have held up for years without needing to be blasted with pressure, which tends to be what actually damages older paint.
On older paver surfaces the joint sand is often already thin. We wash, re-sand to bring the joints back level, and seal so the next stretch of years is easier to keep clean.
By the numbers
The Brevard County tax roll counts 4,846 single-family homes in Melbourne Beach. The typical one was built in 1988, and about 77% were built before 2000.
Older homes mean older driveways, walks and pool decks, and years of mildew and irrigation staining that a garden hose will not move.
Source: Florida Department of Revenue, Brevard County 2026 preliminary tax roll.
Free estimate
We'll measure, look at where the water goes, and leave you an itemized written estimate — anywhere in Melbourne Beach. No charge, no pressure.
Local questions
Usually, yes, but it's still a straightforward one. A lot of homes in Melbourne Beach have gone a long time between washes, so the algae and salt film have had time to set in deeper than a yearly-washed surface would. It still comes clean with the same soft-wash and pressure-wash methods, it just may take a more thorough pass to get all the way through the buildup.
Some of what reads as fading is actually years of grime dulling the surface, and a wash brings a lot of that color back. But if the joint sand has washed low over the years, the pavers can also look uneven or loose, which cleaning alone won't fix. That's why we pair the wash with re-sanding on older paver surfaces instead of calling it done at the rinse.
Often more so than on a newer install. Sealing after a wash slows how fast algae and salt film settle back into the surface, which matters more on pavers that have already had years to weather. We'd rather wash, re-sand, and seal it as one job than have you calling us back again next year for the same buildup.
Keep looking around
Fastest answer
Most questions we can answer on the phone in two minutes, and if we need to see it we'll book the walkthrough while you're on the line.
(321) 586-9227Or text a photo of the space — that's often the fastest way to get a real answer. Prefer email? info@groundworkspaversandturf.com.
Free estimate
Tell us what you're picturing and we'll come measure it.
Five quick questions — then you're booked in and someone reaches out within 5 minutes. Prefer to talk? Call (321) 586-9227.